ASTM A335 Grade P91 NACE Alloy Seamless Pipe Manufacturer

High quality ASTM A335 Grade P91 NACE Alloy Seamless Pipe, check ASTM A335 Grade P91 NACE Alloy Seamless Pipe latest price list of 2017

Looking For ASTM A335 Grade P91 NACE Alloy Seamless Pipe With Customized Length? Our Standard Sizes Are Usually 3m And 6m In Length, But We Also Provide Additional Cutting Service


ASTM A335 Grade P91 NACE Alloy Seamless Pipe Price | ASTM A335 Grade P91 NACE Alloy Seamless Pipe | ASTM A335 Grade P91 NACE Alloy Welded Pipe | ASTM A335 Grade P91 Alloy Welded Pipe | Alloy Steel Seamless Tube | Alloy Steel Seamless Pipe | ASTM A335 Grade P91 Alloy Steel Pipe | Alloy Steel Welded Pipe | Alloy Steel Welded Tube in special size for Special Application


Citizen Pipes is India's largest independent multi-metals pipe & tube supplier & stockholder. Our range covers ASTM A335 Grade P91 NACE Alloy Seamless Pipe, mild steel, stainless steel, cold drawn, structural, tubular, galvanized tubes, pipe, black pipe, and welded tube and pipe.

Widely regarded as being the leading supplier of ASTM A335 Grade P91 NACE Alloy Seamless Pipe in India, Citizen Pipes is the preferred choice for ASTM A335 Grade P91 NACE Alloy Seamless Pipe in India, South & west Africa & Gulf countries.

Are you looking for stock of ASTM A335 Grade P91 NACE Alloy Seamless Pipe?

Citizen Pipes is now offering ASTM A335 Grade P91 NACE Alloy Seamless Pipe largest stock in Mumbai, India

Citizen Pipes is a India based Stockholder of Pipe, Tube & Tubing of multiple Origins – Our stock Materials are from China, India, Malaysia and Western European Origins.


ASTM A335 Grade P91 NACE Alloy Seamless Pipe

ASTM A335 Grade P91 NACE Alloy Seamless Pipe


ASTM A335 Grade P91 NACE Alloy Seamless Pipe Specification

Alloy Seamless Pipes (ASTM A335 Grade P91 NACE) offered by us are made available in ASTM A335 Grades. Made as per IBR standards, these are mainly used in boiler operations. Further, our expertise lies in offering these pipes in various size range as well as in customized parameters as per boiler piping requirements. Sourced from quality conscious manufacturers, we also offer our clients the option of adding their own mark on them.

Materials:
20G.ASTM A106B. ASME SA106B. 12Cr1MoV.15CrMo.

T91.P91.P22.P11.T22.T12.P9.P5.P1.P92.35CrMo. Cr5Mo. 16Mn. WB36. 27SiMn. 10CrMo910.

American Society of Mechanical Engineers Standard:
ASME SA106, ASME SA53, ASME SA335, ASME SA210, ASME SA333, sASME SA213

American Society for Testing and Materials Standard:
ASTM A106. ASTM A53. ASTM A333. ASTM A210. ASTM A213. ASTM A335.

pipe production standards in accordance with HG , GB , SH , HGJ , JB ,ANSI , JIS , DIN and other international standards.


ASTM A335/A335M-P91 high temperature ferritic alloy steel seamless P91

StandardSteel grade Yield strengthM P aTensile M PaElongation Min (vertical bar specimen )% ①Elongation Min (round bar specimens )%Squash
ASTM A335/A335M-03 "high temperature ferritic alloy steel seamless"P1, P2≥ 205≥ 3803022H
P12≥ 220≥ 4153022H
P23≥ 400≥ 5102020H
P91≥ 415≥ 5852020H
Other≥ 205≥ 4153022H
Note: ① using the vertical bar specimens, the wall thickness of less than 8mm, each reduction 0.8mm, P23, P91 should subtract the base elongation of 1.0%, 1.5%, minus all other grades.
StandardSteel grade Yield strengthM P aTensile M PaElongation%Squash 
 
ASTM A500-2001 "Structural carbon steel cold-formed and shaped circular cross-section welded steel pipe and seamless steel pipe."Grade A≥ 228≥ 310≥ 25H 
Grade B≥ 290≥ 400≥ 23H 
Grade C≥ 317≥ 427≥ 21H 
Grade D≥ 250≥ 400≥ 23H 
StandardSteel grade Yield strengthM P aTensile M PaElongation%SquashFlaring
ASTM A556M-96 "water heater with carbon steel cold drawn seamless steel tubes."A2≥ 180≥ 320≥ 35HH
B2≥ 260≥ 410≥ 30HH
C2≥ 280≥ 480≥ 30HH
StandardSteel grade Yield strengthTensile strengthElongation (%) ①  
  
JIS G 3473-1988 "Carbon steel cylinder"STC370≥ 215≥ 370≥ 30Note: ① thickness <8mm pipe, elongation is reduced by the minimum thickness at 1mm, to subtract the elongation of 1.5%.
STC440≥ 305≥ 440≥ 10
STC510A≥ 380≥ 510≥ 10
STC510B≥ 380≥ 510≥ 15
STC540≥ 390≥ 540≥ 20
STC590A≥ 490≥ 590≥ 10
STC590B≥ 490≥ 590≥ 15
StandardSteel grade Yield strengthM P aTensile M PaElongation %①Squash 
 
JIS G 3467-1988 "furnace with steel."STF410≥ 245≥ 410≥ 240.08 Note: ① using vertical bar specimens, the wall thickness of less than 8mm, each reduced 1mm, from the basic minimum elongation shall be subtracted 1.5%.
STFA12≥ 205≥ 380≥ 24
STFA22≥ 205≥ 410≥ 24
STFA23≥ 205≥ 410≥ 24
STFA24≥ 205≥ 410≥ 24
STFA25≥ 205≥ 410≥ 24
STFA26≥ 205≥ 410≥ 24
StandardSteel grade Yield strengthM P aTensile M PaElongation %①Squash 
 
JIS G 3462-1988 "boilers, heat exchangers used in steel pipe."STBA12≥ 205≥ 380≥ 300.08 
Other≥ 205≥ 410≥ 30 
Note: ① using vertical bar specimens, the wall thickness of less than 8mm, each reduced 1mm, from the basic minimum elongation shall be subtracted 1.5%.
StandardSteel grade Wall thickness mmYield strength M PaTensile M PaElongation% ①Flattening / Flaring
JIS G 3461-1988 "boilers, heat exchangers used in carbon steel."STB340≥ 8≥ 175≥ 340≥ 35H
STB410≥ 8≥ 255≥ 410≥ 25H
STB510≥ 8≥ 295≥ 510≥ 25H
Note: ① using vertical bar specimens, the wall thickness of less than 8mm, each reduced 1mm, from the basic minimum elongation shall be subtracted 1.5%.
StandardSteel grade Yield strengthM P aTensile M PaElongation (vertical bar specimen ) %①Elongation ( round bar specimens )%SquashNote: ① using vertical bar specimens, the wall thickness of less than 8mm, each reduced 1mm, from the basic minimum elongation shall be subtracted 1.5%.
JIS G 3456-1988 "high carbon steel pipes."STPT370≥ 215≥ 370≥ 30≥ 280.08
STPT410≥ 245≥ 410≥ 2 5≥ 240.07
STPT480≥ 275≥ 480≥ 2 5≥ 22
StandardSteel grade Yield strengthTensile strengthElongation ( tube sections and longitudinal strips sample) % ①Elongation (round bar specimens )%Squashed or bent
JIS G 3455-1988 "high carbon steel pipes."STS370≥ 215≥ 370≥ 30≥ 28H
STS410≥ 245≥ 410≥ 25≥ 24H
STS480≥ 275≥ 480≥ 25≥ 22H
Note: ① using vertical bar specimens, the wall thickness of less than 8mm, each reduced 1mm, from the basic minimum elongation shall be subtracted 1.5%.
StandardSteel grade Yield strengthM P aTensile M PaElongation ( vertical bar specimen )% ①Elongation ( round bar specimens )%Squash
JIS G 3454-1988 "pressure pipes carbon steel pipe."STPG370≥ 215≥ 370≥ 30≥ 280.08
STPG410≥ 245≥ 410≥ 2 5≥ 240.07
Note: ① using vertical bar specimens, the wall thickness of less than 8mm, each reduced 1mm, from the basic minimum elongation shall be subtracted 1.5%.

P91 alloy tube

MaterialImplementation of standardsSpecificationQuantity
P91GB5310-2008426 * 183
P91ASTMA335-95a426 * 182
P91GB5310-2008426 * 163
P91ASTMA335-95a426 * 14.23
P91GB5310-2008426 * 143
P91GB5310-2008426 * 132
P91GB5310-2008426 * 135
P91GB5310-2008426 * 122
P91ASTMA335-95a426 * 125
P91ASTMA335-95a426 * 115
P91GB5310-2008426 * 113
P91ASTMA335-95a426 * 105
P91ASTMA335-95a406.4 * 803
P91GB5310-2008406.4 * 653
P91ASTMA335-95a406.4 * 503
P91GB5310-2008406.4 * 505
P91GB5310-2008406.4 * 452
P91GB5310-2008406.4 * 403
P91GB5310-2008406.4 * 321

Elongation Requirements

Calculated Minimum Elongation Values
Elongation in 2 in. or 50 mm, min %
Wall Thickness P5, P9, P11, P22 P91
in. mm Longitudinal Transverse Longitudinal
5/16 (0.312)8302020
9/32 (0.281)7.2281919
1/4 (0.250)6.4271818
7/32 (0.219)5.62617
3/16 (0.188)4.82416
5/32 (0.156)42215
7/8 (0.125)3.22114
3/32 (0.094)2.42013
1/18 (0.062)1.618 12

Mechanical Tests Specified

Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test
For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested.
For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipe.
Notes for Hardness Test:P91 shall not have a hardness not exceeding 250 HB/265 HV [25HRC].
Notes for Bend Test:For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7.0 or less shall be subjected to the bend test instead of the flattening test.
Other pipe whose diameter equals or exceeds NPS 10 may be given the bend test in place of the flattening test subject to the approval of the purchaser.
The bend test specimens shall be bent at room temperature through 180 without cracking on the outside of the bent portion.
The inside diameter of the bend shall be 1 inch [25 mm].
Hydrostatic TestEach length of pipe shall be Hydro tested, at option of manufacture nondestructive electric testing can be used.

 

Packaging & Shipping

Utmost care is taken towards Packing of the finished products so as to ensure that the resultant Coils, Foils, Tubes ,Pipes and Fittings reach in the same condition as desired by our valued customers.
Packing specifications for various products are:

  • Larger Dia Fusion Welded Pipes are packed with aluminium end caps in a wooden crates.
  • S.S. Automotive Exhaust Pipes & Scheduled pipes both are packed with plastic end caps in wooden crates.
  • Cold Drawn Seamless Stainless Tubes are packed with plastic end caps in a wooden box with an inside thermocoal covering.
  • Coils and Foils are packed in wooden crates.

ASTM A335 Grade P91 NACE Alloy Seamless Pipe Packaging

Packed ASTM A335 Grade P91 NACE Alloy Seamless Pipe

ASTM A335 Grade P91 NACE Alloy Seamless Pipe Packaging

Packed ASTM A335 Grade P91 NACE Alloy Seamless Pipe


Other Packaging information:
  • Bundle Packing
  • Bundle Packing
  • Wooden Case
  • Wooden Case
  • Wooden Case for U Tubes
  • Reinforced by angle bar

 

Why us?

  • Stainless Steel Seamless Pipes & Tubes Manufacturer since 1996
  • The annual capacity of the plant equals about 12.000 tons
  • Specialized in Pipes & Tubes, Stainless Steel Pipe & Carbon SteelPipe
  • We export seamless tubes / welded tubes everywhere in the world
  • We have our own warehouse of 10,000 feet, so we can offer best price in the market
  • Supplier and trader of IBR Materials like IBR approved Pipes, IBR Certified Tubes

Heilights:

  • Pipes up to 24" made in continuous production from coil
  • Pipes up to 80" made from single plates
  • Maximum thickness 40 mm

Strength

  • Contacts with major mills & stockists around the world.
  • Can offer ex-stock materials as well as mill delivery with nominal margins.
  • Complete in-house testing facilities viz. hydro, eddy current, UT, chemical analysis,
  • physical/mechanical, PMI, microscopic examination, etc…
  • Prime and genuine materials with co-relating original test certificates.

Available Stock at Citizen Pipes

Pipes & Tubes Stock At a Glance:-
Pipe Gradewise Stock At a Glance:-
Tube Gradewise Stock At a Glance:-
Nickel Alloys Pipes & Tubes Stock At a Glance:-
Top Sellers Pipes & Tubes At a Glance:-
List of Countries where Citizen Metal supply Pipes & Tubes:-

List of Countries where Citizen Metal supply Pipes / Tubes :-


Achievements & Awards

Our Certification